Clarify the physical process for fractional dynamical systems

Nonlinear Dynamics - Dynamics in fractional order systems has been discussed extensively for presenting a possible guidance in the field of applied mathematics and interdisciplinary science. Within...     

Validation of a robust and rapid liquid chromatography tandem mass spectrometric method for the quantitative analysis of navitoclax

The Bcl-2 family small molecule inhibitor navitoclax is being clinically evaluated to treat multiple cancers including lymphoid malignancies and small cell lung cancer. A sensitive and reliable method was developed to quantitate navitoclax in human plasma using liquid chromatography with tandem mass spectrometry with which to perform detailed pharmacokinetic studies. Sample preparation involved protein precipitation using acetonitrile. Separation of navitoclax and the internal standard, navitoclax-d8, was achieved with a Waters Acquity UPLC BEH C₁₈ column using isocratic flow over a 3 min total analytical run time. A SCIEX 4500 triple quadrupole mass spectrometer operated in positive electrospray ionization mode was used for the detection of navitoclax. The assay range was 5–5,000 ng/ml and proved to be accurate (89.5–104.9%) and precise (CV ≤ 11%). Long-term frozen plasma stability for navitoclax at −70°C was at least 43 months. The method was applied for the measurement of total plasma concentration of navitoclax in a patient receiving a 250 mg daily oral dose.     

Prediction of allergic reaction risk of Shenmai injection based on real-world evidence coupled with UPLC–Q-TOF-MS

The allergic reaction (AR) of Chinese herbal injection (CHI) has become one of the most noticeable focuses of public health in China. However, it still remains a considerable controversy as to whether low-molecular-weight components in CHI have potential sensitization. In this study, the relationship between AR and low-molecular-weight component profile of Shenmai injection was explored by an interdisciplinary technology integrating real-world evidence and ultra-performance liquid chromatography–quadrupole time-of-flight mass spectroscopy (UPLC–Q-TOF-MS). The AR information of hospitalized patients was obtained by comprehensively analyzing real-world evidence from January 2015 to June 2019 at two Chinese hospitals. The UPLC–Q-TOF-MS was exploited to systematically investigate the low-molecular-weight component profile with 50–1500 m/z mass range, and 3725 MS1 peaks were detected. The optimized partial least squares discriminant analysis model was established to map the influence of low-molecular-weight components on AR. The results of this study showed that high levels of organic acids administered intravenously might be a potential risk factor for inducing AR. By using this method, Shenmai injection with high AR risk could be recognized precisely with 100% accuracy before clinical use.     

Luminescent Thin Films Enabled by CsPbX3 (X=Cl,Br, I) Precursor Solution

Inorganic cesium lead halide perovskite nanocrystals are candidates for lighting and display materials due to their outstanding optoelectronic properties. However, the dissolution issue of perovskite nanocrystals in polar solvents remains a challenge for practical applications. Herein, we present a newly designed one-step spin-coating strategy to prepare a novel multicolor-tunable CsPbX₃ (X=Cl, Br, I) nanocrystal film, where the CsPbX₃ precursor solution was formed by dissolving PbO, Cs₂CO₃, and CH₃NH₃X into the ionic liquid n-butylammonium butyrate. The as-designed CsPbX₃ nanocrystal films show high color purity with a narrow emission width. Also, the blue CsPb(Cl/Br)₃ film demonstrates an absolute photoluminescence quantum yields (PLQY) of 15.6 %, which is higher than 11.7 % of green CsPbBr₃ and 8.3 % of red CsPb(Br/I)₃ film. This study develops an effective approach to preparing CsPbX₃ nanocrystal thin films, opening a new avenue to design perovskite nanocrystals-based devices for lighting and display applications.     

Direct Synthesis of Adipic Esters and Adiponitrile via Photoassisted Cobalt-Catalyzed Alkene Hydrodimerization

The direct hydrodimerization of acrylates and acrylonitrile offers a general streamlined access to industrially important intermediates to nylon 6,6. However, a practical catalytic method for this process has thus far underdeveloped owing to the challenges in regioselectivity and environmental compatibility of applied reagents. Here, we report a cobalt-catalyzed tail-to-tail hydrodimerization of activated alkenes driven by a visible-light photoredox catalysis at ambient temperature, which is applicable to both adipates and adiponitrile synthesis from potentially renewable feedstocks. This protocol utilizes half equivalent of hantzsch ester as a recyclable two-electron and two-proton donor with the assistance of catalytic amount of base as a proton shuttle, and has been shown to be highly regioselective and efficient for hydrodimerizing various activated alkenes to 1,4-difunctionalized butane derivatives.     

Metabolites from a New Actinobacteria,Herbidospora yilanensis

Chemistry of Natural Compounds -     

Improved Reversible Zinc Storage Achieved in a Constitutionally Crystalline-Stable Mn(VO3)2 Nanobelts Cathode

Rechargeable zinc-ion batteries (ZIBs) are potential for grid-scale applications owing to their safety, low price, and available sources. The development of ZIBs cathode with high specific capacity, wide operating voltage window and stable cyclability is urgently needed in next-generation commercial batteries. Herein, we report a structurally crystalline-stable Mn(VO₃)₂ nanobelts cathode for ZIBs prepared via a facile hydrothermal method. The as-synthesized Mn(VO₃)₂ exhibited high specific capacity of 350 mAh g⁻¹ at 0.1 A g⁻¹, and maintained a capacity retention of 92 % after 10,000 cycles at 2 A g⁻¹. It also showed good rate performance and obtained a reversible capacity of up to 200 mAh g⁻¹ after 600 cycles at 0.2 A g⁻¹ under −20 °C. The electrochemical tests suggest that Mn(VO₃)₂ nanobelts impart fast Zn²⁺ ions migration, and the introduction of manganese atoms help make the structures more indestructible, leading to a good rate performance and prolonged cycle lifespan.     

Injectable and self-healing hydrogels with tissue adhesiveness and antibacterial activity as wound dressings for infected wound healing

The design of wound dressings with excellent self-healing ability, adequate adhesion, good biocompatibility, and potential antibacterial ability is of great significance for the healing of infected wounds arising from human activities. Herein, a series of multi-functional hydrogel dressings, poly(ionized isocyanoethyl methacrylate-glutamine)/poly(hexamethylene guanidine) (iG_x/PHMG_y) hydrogels, were obtained through homopolymerization of fully ionized isocyanoethyl methacrylate-glutamine (iIEM-Gln) in the presence of poly(hexamethylene guanidine) (PHMG), in which strong hydrogen bonds were formed among urea groups in the P (iIEM-Gln) chain to form a stable hydrogel network. The prepared iG_x/PHMG_y hydrogels exhibited adequate self-healing ability and tissue adhesion, which could be firmly adhered to the wound surface and remained intact during application. In addition, the presence of PHMG imparted good antibacterial activity to the hydrogels for the effective promotion of the wound healing in S. aureus infected skin wound on mice. Overall, this multi-functional hydrogel provides a facile and effective strategy for the design of infected wound dressings, and may show great potential in clinical applications.     

A New β-Ionone from Liriodendron tulipifera

Chemistry of Natural Compounds - A new β-ionone, litulipiferic acid (12), was isolated from the leaves of Liriodendron tulipifera (Magnoliaceae). The structure of the new β-ionone was...     

Synthesis and Applications of SAPO-34 Molecular Sieves

Silicoaluminophosphate zeolite (SAPO-34) has been attracting increasing attention due to its excellent form selection and controllability in the chemical industry, as well as being one of the best industrial catalysts for methanol-to-olefin (MTO) reaction conversion. However, as a microporous molecular sieve, SAPO-34 easily generates carbon deposition and rapidly becomes inactivated. Therefore, it is necessary to reduce the crystal size of the zeolite or to introduce secondary macropores into the zeolite crystal to form a hierarchical structure in order to improve the catalytic effect. In this review, the synthesis methods of conventional SAPO-34 molecular sieves, hierarchical SAPO-34 molecular sieves and nanosized SAPO-34 molecular sieves are introduced, and the properties of the synthesized SAPO-34 molecular sieves are described, including the phase, morphology, pore structure, acid source, and catalytic performance, in particular with respect to the synthesis of hierarchical SAPO-34 molecular sieves. We hope that the review can provide guidance to the preparation of the SAPO-34 catalysts, and stimulate the future development of high-performance hierarchical SAPO-34 catalysts to meet the growing demands of the material and chemical industries.